詳細參數：
梅特勒電子天平MS105DU無論是簡單的日常工作，還是復雜的稱量程序，NewClassic MS半微量天平將的性能和提高生產力進行了的結合，這一切都來源于快速的穩定時間以及一貫的可靠結果。來自瑞士的高分辨率稱量技術(HRT)，保證了整個稱量范圍內的始終精確。創新左右手互換開關門(ErgoDoor)使樣品的稱量盡可能簡單和方便。內置日期和時間功能，進行符合GLP/GMP規范的打印輸出，確保您的研究的全面控制和可追溯性。
梅特勒電子天平MS105DU特點和利益
精確稱量
采用梅特勒-托利多高分辨率稱量技術(HRT)，內置兩組砝碼。配合全自動校準技術(FACT)，確保天平自動完成校正和線性化。
高效處理
減少每次稱量過程必須的操作步驟。左右手互換開關門(ErgoDoor)，實現一只手打開防風罩的同時，另一手進行加樣。
節約空間
折疊式玻璃防風門，為您節約了使用空間，避免凸出天平以外。天平背部的通訊接口可從側面進行連接。
易于清潔
天平清潔從未如此方便：通過防風罩鎖定裝置QuickLock)拆卸防風罩，僅需幾個步驟，并且所有防風罩玻璃和承水盤均可放入洗碗機清洗。
Standard Features
All models offer
HCD (High Contrast Display)
全自動校準技術(FACT)
保護罩(終端)
保護罩
Below weighing hook for weighing below the balance
高分辨率稱量單元(HRT)
Overload Protection
Built in Date and Time function
SmartTrac shows the entire weighing range
Programmable 3 SmartKeys for shortcut access to applications
Protection of main balance configuration
Weighing in 16 different units
Taring over the entire weighing range
Be adapted to the environment
Applications like Piece counting, Percent weighing, Free factor, Statistics, Formulation, Totaling
Working in different languages: German, English, French, Spanish, Italian, Polish, Czech
規格 - MS105DU 半微量天平
Repeatability (sd) 0.08 mg
Repeatability (sd), fine range 0.03 mg
Linearity 0.15 mg
Sensitivity temperature drift (10-30°C) 2 ppm/ °C
Stabilization time 8 s / 4 s
Usable height of draft shield 234 mm
Weighing pan dimensions ø 80 mm
Balance dimensions LxWxH 358x247x331 mm
Weight of balance 6.6 kg
Repeatability (sd), fine range at low load (20g) 0.02 mg
Linearity (within 10 g), typical value 0.02 mg
Minimum weight (acc. to USP), typical value 45 mg
Minimum weight (acc. to 1%, k=2), typical value 3 mg
Limit values
Maximum capacity 120 g
Maximum capacity, fine range 42 g
Readability 0.1 mg
Readability, fine range 0.01 mg
Repeatability (at nominal load) 1) 0.08 mg (100 g)
Repeatability (at low load) 1)
Linearity deviation 0.15 mg
Sensitivity offset 2) 0.4 mg (100 g)
Typical values
Repeatability (at nominal load) 1) 0.06 mg (100 g)
Repeatability (at low load) 1) 0.015 mg (20g) 3)
Minimum weight (according to USP) 45 mg 3)
Minimum weight (@U=1%, 2 sd) 3 mg 3)
Settling time 4s / 8s
Sensitivity offset 2) 0.3 mg (100 g)
Dimensions
Weighing pan dimensions (mm) ø 80
Balance dimensions LxWxH (mm) 358x247x331
1) Standard deviation (sd)
2) Stability of sensitivity with FACT self-adjustment switched on
QQ:2568841715
