當前位置：上海蠻吉光電科技有限公司>>>>ATF7 Sensor

ATF7 Sensor

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地上海市

在線詢價收藏產品查看聯系電話

紡織服裝機械網采購部電話：0571-88918531QQ:2568841715

聯系方式：查看聯系方式

更新時間：2023-12-15 19:10:04瀏覽次數：105次

聯系我時，請告知來自紡織服裝機械網

產品分類 品牌分類

暫無信息

上海蠻吉光電科技有限公司

經營模式：其他

商鋪產品：132條

所在地區：上海上海市

詢價 給他留言

產品簡介

TheATF7WDIsATF7isahighspeed,highaccuracy,autonomousdigitalautofocussensor

詳細介紹

The ATF7
WDI’s ATF7 is a high speed, high accuracy, autonomous digital autofocus sensor. Its “Smart Sensor Architecture” (SSA) incorporates a semiconductor laser, built-in CMOS image sensor, FPGA and microprocessor for fast digital image processing. By projecting a laser line onto the sample and digitally processing the image, the ATF7 provides fast and
accurate measurements of the distance and direction to focus. This information can then be output directly to WDI’s MCM+ or MCZ controller, or to any compatible controller.
High Accuracy At Fast Speeds.
WDI’s ATF7 sensors project their focusing laser directly through the objective lens of the microscope. This “Through The Lens” (TTL) technique allows the ATF7 to provide extremely accurate autofocus, with a success rate typically higher than 99%. The ATF7’s on-board digital processing allows it to couple this accuracy with extremely high speeds.
Static or Dynamic Autofocus
The ATF6 is continually assessing distance and direction to focus, updating its data every 0.6 milliseconds. This allows the sensor to keep samples in focus regardless of whether they are stationary or in motion. This powerful tracking autofocus makes the ATF7 perfect for scanning very large specimens quickly and precisely.
Maximum Flexibility
By projecting a laser line, the AFT7 sensor operates equally effectively on patterned and unpatterned specimens as well as diffusing and reflective surfaces making it ideal for media such as TFT arrays and photo masks. The ATF7 also automatically adjusts its laser intensity and sensor expose time, allowing it to adapt from low reflectivity (down to 1%) to highly reflective
(99%) surfaces. It is compatible with objectives from 2X to 100X, and wavelengths including UV, NUV and NIR. The ATF7 can also achieve focusing with a programmable Z offset function.
Easy Integration
All of the sensors in WDI’s ATF family are designed with ease of integration in mind. The ATF7 can be purchased as astand-alone sensor with analog output, or as full autofocus systems, integrated with either WDI’s MCM+ controller for driving an external Z stage or MCZ controller which includes the ability to drive a two-phase stepper motor for Z actuation.
All WDI’s ATF sensors have small, standardized footprints and connections, and can output in either analog or digital formats, making them both easy to install and easy to upgrade as application requirements evolve. The ATF7 is pin to pin compatible with the ATF4SA and is thus a “plug and play” upgrade.

ATF7 AUTO FOCUS & TRACKING SYSTEM

ATF7 Sensor
Structured Light Pattern	Line Segment
Sensor Wavelength	Choice of 660nm or 785nm
Image Detector	Line Scan CMOS
Internal Update Rate	20kHz
Static Autofocus Accuracy	± 1/4 Objective Depth of Focus
Fast Tracking Autofocus Accuracy	± 1/2 Objective Depth of Focus

General Performance
Output Data Rate	1.7kHz
Reflectivity Adaption Delay	1ms
Laser Type	Semiconductor
Laser Safety	Class 2 660 nm
Weight	250g
Dimensions	40 X 40 X 120mm
Maximum Cable Length	1.8m
Compliance	CE SEMI
External Requirements
Specimen Reflectivity	1% ~ 99%
Glass Thickness	> 0.5mm
Diffusing Specimen	Yes
Specular Specimen	Yes
Patterned Specimen	Yes
Textured Specimen	Yes
Operating Specifications
Operating Specifications	18V ~ 25V, 24V Nominal
Operating Temperature	18°C ~ 35°C
Storage Temperature	10°C ~ 45°C
Humidity	10% ~ 75% non condensing