E系列電流鉗使用霍爾效應技術原理測量交流和直流電流從幾毫安甚至超過10安。細長、狹窄的結構設計使得此系列電流鉗適用于狹窄空間的線束電流測量，比如電路板、電機控制或機動電動車方面的線束測量或其它狹小空間的測試。其固有的低相移也確保可靠和準確的功率測量。此系列電流鉗輸出電壓信號（mV）,能夠進行交流和直流信號的真有效值測量。型號E6N是靈敏度的，因此適合小電流測量。E系列電流鉗是萬用表、記錄儀和其它記錄設備的工作伙伴。型號E3N可以直接和示波器相連接。
示波器用交直流電流鉗 型號E3N
Clamp-on AC/DC current probe for oscilloscope use Model E3N
| 電流Current | 10 A peak | 100 A peak |
| 輸出Ouput | 100 mV/A | 10 mV/A |
電氣參數Electrical specifications
輸出信號Output signal:
In mV (1000 mV peak max)
精度和相移 Accuracy and phase shift (1):
| 范圍 Range | 100 mV/A | 10 mV/A |
| 電流范圍 Current range | 50 mA...10 A peak | 1 A...100 A peak |
輸出信號精度
% Accuracy of output signal | 3% ±5 mV | 500 mA...40 A peak: 4% ±500 μV
40...100 A peak :15% max at 100 A |
| 頻率范圍 Frequency range | DC...100 kHz (-3 dB) |
| 偏差 Phase shift | DC...65 Hz: < 1.5° | DC...65 Hz: < 1° |
| 插入阻抗nsertion impedance | 0.01 Ω |
| 噪聲 Noise | 6 mV | 600 μV |
| 轉換速率 Slew Rate | 0.3 V/μs | 20 mV/μs |
| 上升/下降時間 Rise/Fall Time | 3 μs | 4 μs |
工作電壓 Working voltage:
600 Vrms max
通常模式電壓 Common mode voltage:
600 Vrms max
相鄰導體影響 Influence of adjacent conductor:
< 0.2 mA/A AC
導線在鉗口內位置的影響 Influence of conductor positioning in the clamp’s jaws:
0.5% of the reading at 1 kHz
電池 Batteries:
9 V Alkaline (NEDA 1604A, IEC 6LR61)
電池壽命 Battery life:
55 Hrs approx.
典型消耗 Typical consumption:
8.6 mA
電池電量顯示 Battery level indicator:
Green LED when > 6.5 V
過載指示 Overload indicator :
紅色LED指示被測電流過高相對于所選范圍
Red LED indicates the measured current is too high for the selected range
機械參數 Mechanical specifications
操作溫度 Operating temperature:
0 °C to +50 °C
存儲溫度Storage temperature:
-30 °C to +80 °C
溫度影響 Temperature Influence:
< 0.2% per °C
工作相對濕度 Operating relative humidity:
+10° to +30°C : 85 ±5% RH (without condensation)
+40° to +50°C : 45 ±5% RH (without condensation)
操作高度 Operating altitude :0 to 2000 m
直流調零 Adjustment of DC zero:
20 turn potentiometer (± 1.5 A min)
夾持能力Max. jaw insertion capacity:
Ø11.8 mm
防護等級 Casing protection:
IP20 in accordance with IEC 529
跌落測試 Drop test:
1 m on a 38 mm container of oak on concrete, test in accordance with IEC 1010
沖擊保護 Shock protection:
100 g (IEC 68-2-27)
抗振性 Vibration :
10/55/10 Hz, 0.15 mm test in accordance with IEC 68-2-6
阻燃能力 Self-extinguishing ability:
Casing : UL94 V2
尺寸 Dimensions:
231 x 36 x 67 mm
重量 Weight: approx.
330 g with batteries
顏色Colours:
深灰色 Dark grey
輸出Output:
2米長同軸線纜，帶BNC頭。
Via 2 m coaxial cable ended with BNC insulated plug.
安全規范 Safety Specification
電氣 Electrical:
600 V category III, pollution: 2
300 V category IV, pollution: 2
電磁兼容性 Electromagnetic Compatibility
(EC Stamp):
EN 50081-1: class B
EN 50082-2:
- Electrical discharge IEC 1000-4-2
- Radial Field IEC 100-4-3
- Rapid Transients IEC 1000-4-4
- Magnetic Field to 50/60 Hz IEC 1000-4-8
(1)參考條件：23°C±5°K，相對濕度20％至75％，頻率為48赫茲到65赫茲，外部磁場<40 A/ m時，附近沒有載流導體，測試樣品中心，負載阻抗： 1 MΩ 。
(1) Reference Conditions : 23°C ±5°K, 20 to 75% RH, 48 to 65 Hz, external magnetic field < 40 A/m, no current carrying conductor nearby, centred test sample, load impedance 1 MΩ
會員1.png)
QQ:2568841715
